Popular Hydraulic Pilot Control Electric Bucket Wheel Loader Xc958-EV 5ton Payloader with Large Li Battery

• Customization: Available
• After-sales Service: Global Warranty
• Warranty: 1 Year
• Model NO.: XC958-EV
• Certification: CE
• Condition: New
• Rated Load: 3-6t
• Transmission: Hydraulic
• Load and Unload Mode: Front Discharge
• Walking Mode: Wheeled
• Type: Medium-sized Loader
• Machine Weight: 18000 Kg
• Bucket Capacity: 3.2 M3
• Power: 270kw
• Dumping Height: 3370mm
• Transport Package: Nude Package
• Specification: 8665*2996*3515mm
• Trademark: China Top 1 Brand
• Origin: Xuzhou, Jiangsu, China
• HS Code: 84295100
• Production Capacity: 1000 Units/Month
• Package Size: 866.00cm * 299.00cm * 351.00cm
• Package Gross Weight: 18000.000kg

Product Description

XC958-EV is the representative of our third-generation pure electric loader, which adopts the industry's first "three-motor" technical solution, that is, the whole machine has no gearbox. Using our core independent power intelligent matching and optimization technology, the integrated intelligent control of vehicle motor power, speed, torque, etc., combined with intelligent thermal management system, energy recovery, three-level fault safety protection and other functional design, to achieve intelligent, efficient and safe operation of the whole machine. It meets the environmental use requirements of -40°C~ 50°C, and is widely used in steel mills, power plants, coking plants, coal chemical industries, coal yards, sand and gravel, Main configuration parameters tunnels and other working conditions.

1.  Green pure electric drive, more environmentally friendly and emission reduction 
(1) "Electricity" instead of "oil", that is, the vehicle walking system and hydraulic system are driven by motors respectively, pure electric, zero emission, and none At the same time, it can save the maintenance cost of diesel engine air filter, engine filter, diesel filter, etc. 
(2) The average energy consumption cost is about 1/4 of that of diesel engine, which greatly reduces the energy use cost. 
(3) Each electric loader can reduce CO2 emissions by more than 150 tons per year, reduce carbon emissions, and be more environmentally friendly.

2. Powerful power, efficient and energy-saving operation
(1) The walking system adopts the industry's original string dual-motor drive technology, which can carry out intelligent coupling transmission, which is more intelligent and powerful;
(2) The industry's first gearbox-free solution reduces the fault feedback rate, eliminates the maintenance and use cost of the gearbox, and saves worry and money. 
(3) The whole machine is equipped with FNR handle function as standard, which can adjust the motor speed in real time according to the throttle opening, realize stepless speed change, and work more efficiently. 
(4) The motor controller can make the motor reverse charge the battery during the operation process by detecting the brake or throttle signal, etc., and the operation is more energy-saving.

3. European and American high-end platform, comfortable, quiet and convenient 
(1) The new XC9 series of European and American high-end platform products, using CE, North American and other standard design, new industrial design. 
(2) Standard super-curved, panoramic, international cab, humanized layout and smooth shape, open and transparent, quiet and comfortable. 
(3) The design of large-articulation, large-open, and mine-level frame structural parts adopts intelligent design and manufacturing methods such as CAE simulation analysis and robot welding to meet the requirements of various ultra-heavy load conditions. 
(4) The standard full rear-flip electric control lifting hood has a large opening angle and is more convenient for maintenance and maintenance.

4. Enjoy a long warranty, reliable and worry-free
(1) The key electrical components such as the "three-electric system"adopt standardized and modular design, and choose internationally renowned brands. Dust-proof and waterproof requirements meet the IP67 level of civil commercial vehicles, batteries,The motor is guaranteed for five years or 10,000 hours (whichever comes first), which is safe and reliable. 
(2) The key component system adopts intelligent thermal management systems such as electronic fans, which can meet different operation requirements and be more intelligent and efficient. (3) The vehicle adopts a three-level fail-safe protection function design, and can freely set the low-power charging prompt and run according to the user's requirements Status information, fault information, etc. can be displayed through the display screen, and online remote fault diagnosis can also be carried out, which is more intelligent and worry-free.

5. Dual-gun DC fast charging, long battery life
(1) There are two charging interfaces on the right side of the vehicle Oil filling ºC -40 ~ 55 counterweight, and the charging interfaces meet the requirements of the national standard, supporting double guns, DC and fast charging; In addition, one of the two charging ports can be selected for single gun charging. 
(2) The recommended specifications of the charging pile are 240kW~360KW, and the charging must be charged in strict accordance with the relevant use requirements. 
(3) The operating conditions are different, the battery life is different, 45L the average charging is one hour, and the continuous operation is 6~10 hours.

Product Parameters

XC958-EV WHEEL LOADERS
Operating weight	18700kg
Optional Bucket capacity	2.5-5.0m³
Rated Power of Drive Motor	2x100 kW
Rated Storage Energy	282kWh
Rated load	5500 kg
Total cycle time	9.7s
Battery Type	LiFePO
Bucket Digging force	177kN
Dump clearance, full height discharge	3420 mm
Dump reach, full height discharge	1240 mm
Operation Method	Pilot Control
Duration working time (Light/Heavy)	8/5hours
Ambient temperature	-40 ~ 55ºC
Overall appearance size	8580x2996x3455mm

Product Picture

                                                                                                             

                                                                                                                                 

1. WHO ARE WE?
XUZHOU SHANGHENG ENGINEERING MACHINERY CO.,LTD is a leading construction machinery exporter,located in
Xuzhou city,Jiangsu province where Xuzhou Construction Machinery Group Inc in. We have the domestic agency rights
of them more than 10years,based on the advantage of them,we also estabish long-time business with other famous
brands.

2. HOW IS YOUR PRICE COMPARED WITH MANUFACTURERS/FACTORIES?
We work as the leading dealers of various leading China construction machinery manufacturers/ factories, and are
constantly treated with best dealership price. From numerous comparison and feedbacks from clients, our price is more
competitive than the price from manufacturers/factories.

3. HOW IS YOUR DELIVERY TIME?
In general circumstance, we can have an immediate delivery of regular machines for our clients within 7 days, because
we have a variety of resources to check machines in stock, locally and nation widely, and to receive machines in timely
manner. But for manufacturers/factories, it will take more than 30 days to produce the ordered machine.

4. HOW SOON CAN YOU RESPOND CLIENT INQUIRIES?
Our team is consisted of a group of diligent and dynamic people, working 247 to respond client inquiries and questions
all the time Most problems can be solved within 4 hours while manufacturers/factories will take much longer to give
response.

5. WHICH PAYMENT TERMS CAN YOU ACCEPT?
Normally we can work on T/T term or L/ term, sometime DP term.
1)On T/T term, 30% down payment is required in advance, and 70% balance shall be settled before shipment, or
against the copy of original B/L for long-term cooperating client.
2)On L/C term, a 100% irrevocable L/ C without "soft clauses"from an international recognized bank can be accepted.
Please seek the advice from the individual sales manager whom you work with.

6. WHAT SERVICES CAN WE PROVIDE?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency:USD,EUR;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese

7. WHAT PRODUCTS YOU CAN GET FROM US?
Our main products including,wheel loader,backhoe loader,truck crane,crawler crane,tower crane,road roller,motor
grader,excavator,bulldozer,forklift,dump truck,trailer,tractor truck,special vehicle ,Marine Machinery and all of their
spare parts.